Frequently Asked Questions About Installing Nylon Conveyor Belts

1. Set up the movable shaft and the conveyor belt roll. Take the transformer coil of the conveyor belt roll, put on the movable shaft that can rotate flexibly, and roll the belt well.
2. Pay attention not to place and lift the conveyor belt roll guide when opening and falling. In places where it is not suitable to be released, the conveyor belt roll can be unrolled first, and the retractable nylon conveyor belt can have a large included angle. How to do this is to avoid damage to the nylon conveyor belt, and the retractable part is recommended to be placed on the nylon conveyor belt for lifting.
3. Replace it with a conveyor belt and get it at one time. If it is to replace the conveyor belt, the new belt can be combined with the old belt, and the unloading can be done together with the mechanical new conveyor belt.
4. To avoid lowering failure. The transport aircraft on the relevant level can block the old transport aircraft at any point. For a transport aircraft working in a skewed direction, it is necessary to select the sealing point to avoid the drop due to the net weight.
5. Avoid extrusion processing when pulling the rope. After the transport plane adjusts the position of the new belt, fix one side of the tape with a clamp, and then connect the avoiding roller with the rope of the rack, and use the traction rope mechanism to balance the polyester EP conveyor belt to the transport in the plane. When pulling the rope, it is necessary to avoid the extrusion process between the conveyor belt and the frame at a large inclination angle.
6. Fix it with a fixture. Fix one side of the textured conveyor belt on the conveyor frame with a clamp, and tighten the other end through the pulley block until the textured conveyor belt has no more slack on the return buffer roller.
7. Keep the tensioning machinery at an appropriate distance, and keep the tensioning machinery at a distance of about 100-130 mm from the terminal.